Sujal Engineering
Odhav, Ahmedabad, Gujarat
GST No. 24AZNPP5838K1ZP
TrustSEAL Verified
Call 0804860705782% Response Rate
SEND EMAIL
Sujal Engineering has developed the most advanced thermal hot oil pump for circulating heat transfer thermal oils or hot water under high-temperature conditions. Due to a high temperature of the oil or water this thermal hot oil water cooled pump is primarily used to feed an oil burner or furnace.
Product Details:
| Minimum Order Quantity | 1 Number |
| Motor Phase | Three Phase |
| Pump Type | Air cooled pump |
| Motor Horsepower | As per requirement |
| Brand | Sujal |
| Head | Up to 150 m |
| Material | Grey Cast Iron,Cast Steel,Alloy Cast Steel |
| Max Flow Rate | 180 m3/hr |
| Temperature | 70 to 350 degree C |
| Capacity | Up to 300 m3/hr |
| Model Name/Number | SAPP |
| Size | 25 to 100 mm |
| Cooling Technique | AIR COOLED |
| Quantity Per Pack | 1 |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Pressure | Up to 15 bar |
| Speed | Up to 2900 rpm |
Our SAPP Series of thermic fluid hot oil air cooled pump has been specifically designed for circulating thermal oils at elevated temperatures without the need of expensive mechanical seals and auxiliary cooling arrangements.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Motor Phase | Three Phase |
| Pump Type | CENTRIFUGAL PUMP |
| Brand | SUJAL |
| Head | Up to 150 mtr |
| Material | CI,CS,SS304 / 316,SS 304 L/316L,Alloy 20,Hast alloy B or C,CD4MCU,etc. |
| Max Flow Rate | Up to 380 m3/hr |
| Temperature | Up to 300 deg C |
| Speed | Up to 3500 rpm |
| Body Material | CI, CS, SS304 / 316, SS 304 L/316L, Alloy 20, Hast alloy B or C,CD4MCU, etc. |
| Capacity | Up to 380 m3/hr |
| Cooling Method | Water Cooled |
| Finishing | Paint Coated |
| Model Name/Number | SCPP |
| Size | 32 mm to 150 mm |
| Pressure | Up to 15 kg/cm2 |
| Cooling Technique | Air cooled |
| Quantity Per Pack | 1 |
| Country of Origin | Made in India |
Our SAPP Series of thermic fluid hot oil air cooled pump has been specifically designed for circulating thermal oils at elevated temperatures without the need of expensive mechanical seals and auxiliary cooling arrangements.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Industrial |
| Type Of Boiler | Thermic fluid boiler |
| Model Name/Number | SAPP |
| Material | Grey Cast Iron,Cast Steel,Alloy Cast Steel |
| Head | up to 80 Meter |
| Max Flow Rate | 180 m3/hr |
| Pump Type | AIR COOLED |
| Country of Origin | Made in India |
Our SAPP Series of thermic fluid hot oil air cooled pump has been specifically designed for circulating thermal oils at elevated temperatures without the need of expensive mechanical seals and auxiliary cooling arrangements.
Additional Information: