Sujal Engineering
Odhav, Ahmedabad, Gujarat
GST No. 24AZNPP5838K1ZP
TrustSEAL Verified
Call 0804860705788% Response Rate
SEND EMAIL
Our polypropylene pumps are designed especially for high corrosive chemicals where metal are not recommended or its cost is high. This pumps are centrifugal corrosion resistant with horizontal radially split one piece volute casing design fitted with semi open impeller single entry single stage for smooth running performance against corrosion according to the standards.
Product Details:
| Minimum Order Quantity | 1 Number |
| Brand | Sujal |
| Head | Up to 45 mtr |
| Capacity | Up to 50 m3/hr |
| Pressure | Up to 5 kg/cm2 |
| Size | 25 mm to 75 mm |
| Speed | Up to 2900 rpm |
| Temperature | Up to 100 degree C |
| Material Of Construction | PP, GRP, PVDF, UHMWPE etc |
Our polypropylene pumps are designed especially for high corrosive chemicals where metal are not recommended or its cost is high. This pumps are centrifugal corrosion resistant with horizontal radially split one piece volute casing design fitted with semi open impeller single entry single stage for smooth running performance against corrosion according to the standards.
In polypropylene pumps high alumina ceramic sleeve is used to protect shaft from any type of corrosion and abrasion. Mechanical seal prohibit the leakage from the pumps and best cast iron heavy duty oil lubricated bearing housing helps for achieving maximum strength of pumps.
Product Details:
| Minimum Order Quantity | 1 Number |
| Head | Up to 45 mtr |
| Fuel Type | Electricity |
| Motor Phase | Single Phase |
| Size | 25 mm to 75 mm |
| Capacity | Up to 50 m3/hr |
| Speed | Up to 2900 rpm |
| Pressure | Up to 5 kg/cm2 |
| Temperature | Up to 100 degree C |
| Material Of Construction | PP, GRP, PVDF, UHMWPE etc |
Our polypropylene pumps are designed especially for high corrosive chemicals where metal are not recommended or its cost is high. This pumps are centrifugal corrosion resistant with horizontal radially split one piece volute casing design fitted with semi open impeller single entry single stage for smooth running performance against corrosion according to the standards.
In polypropylene pumps high alumina ceramic sleeve is used to protect shaft from any type of corrosion and abrasion. Mechanical seal prohibit the leakage from the pumps and best cast iron heavy duty oil lubricated bearing housing helps for achieving maximum strength of pumps.
Product Details:
| Minimum Order Quantity | 1 Number |
| Head | Up to 45 mtr |
| Material of Construction | PP, GRP, PVDF, UHMWPE etc |
| Size | 25 mm to 75 mm |
| Temperature | Up to 100 degree C |
| Capacity | Up to 50 m3 / hr |
| Speed | Up to 2900 rpm |
| Pressure | Up to 5 kg / cm2 |
Product Details:
| Minimum Order Quantity | 1 Number |
| Head | Up to 45 mtr |
| Size | 25 mm to 75 mm |
| Temperature | Up to 100 degree C |
| Speed | Up to 2900 rpm |
| Capacity | Up to 50 m3/hr |
| Pressure | Up to 5 kg/cm2 |
| Material Of Construction | PP,GRP,PVDF,UHMWPE etc |
Product Details:
| Minimum Order Quantity | 1 Number |
| Usage/Application | Pump |
| Flow Rate | 2 m3/h-150 m3/h |
| Available Material | Fiberglass,Glass Steel,Engineer Plastic |
| Motor Power | 0.55-45 kW |
| Voltage | 380V/400V/415V |
| Inlet And Outlet Size | 25mm-100mm |
| Max Head | Greater than 150m |
| Driving Type | Motor |
| Pressure or Delivery Head | 10m-60m |
| Speed | 2900 rpm |
Product Details:
| Minimum Order Quantity | 1 Number |
| Head | Up to 45 mtr |
| Motor Horsepower | 3 HP |
| Capacity | Up to 50 m3 / hr |
| Body Material | Cast Iron |
| Cooling Method | Water Cooled |
| Fuel Type | Electricity |
| Motor Phase | Single Phase |
| Size | 25 mm to 75 mm |
| Pressure | Up to 5 kg / cm2 |
| Speed | Up to 2900 rpm |
| Temperature | Up to 100 degree C |
| Material Of Construction | Pp,Grp,PVDF,UHMWPE etc |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Head | Up to 45 mtr |
| Capacity | Up to 50 m3/hr |
| Length | 25 mm to 75 mm |
| Working Temperature | Up to 100 Deg C |
| Speed | Up to 2900 rpm |
| Pressure | Up to 5 kg/cm2 |
| Power Source | Electric |
| Motor Horsepower | 1 HP |
| Material Of Construction | PP,GRP,PVDF,UHMWPE etc |
Our polypropylene pumps are designed especially for high corrosive chemicals where metal are not recommended or its cost is high. This pumps are centrifugal corrosion resistant with horizontal radially split one piece volute casing design fitted with semi open impeller single entry single stage for smooth running performance against corrosion according to the standards.
In polypropylene pumps high alumina ceramic sleeve is used to protect shaft from any type of corrosion and abrasion. Mechanical seal prohibit the leakage from the pumps and best cast iron heavy duty oil lubricated bearing housing helps for achieving maximum strength of pumps.
Product Details:
| Minimum Order Quantity | 1 Number |
| Pressure | Up to 5 kg/cm2 |
| Head | Up to 45 mtr |
| Motor Phase | Single Phase |
| Automation Grade | Manual |
| Cooling Method | Water Cooled |
| Capacity | Up to 50 m3/hr |
| Fuel Type | Electricity |
| Size | 25 mm to 75 mm |
| Speed | Up to 2900 rpm |
| Temperature | Up to 100 degree C |
| Material | Cast Iron |
| Material Of Construction | PP,GRP,PVDF,UHMWPE etc |
Product Details:
| Minimum Order Quantity | 1 Number |
| Head | Up to 45 mtr |
| Body Material | Cast Iron |
| Cooling Method | Water Cooled |
| Fuel Type | Electricity |
| Motor Phase | Single Phase |
| Size | 25 mm to 75 mm |
| Capacity | Up to 50 m3/hr |
| Pressure | Up to 5 kg/cm2 |
| Speed | Up to 2900 rpm |
| Temperature | Up to 100 degree C |
| Material Of Construction | PP,GRP,PVDF,UHMWPE etc |
Product Details:
| Minimum Order Quantity | 1 Number |
| Head | Up to 45 mtr |
| Size | 25 mm to 75 mm |
| Temperature | Up to 100 degree C |
| Speed | Up to 50 m3/hr |
| Material Of Construction | PP, GRP, PVDF, UHMWPE etc |
The extremely strong and durable Corrosion Resistant Polypropylene centrifugal pumps can handle highly corrosive liquids, like acid, harsh chemical substances, and solvents. Endowed with a rugged design, the machine can be used for intermittent intervals, as well as continuous flow of fluid applications. high. This pumps are centrifugal corrosion resistant with horizontal radially split one piece volute casing design fitted with semi open impeller single entry single stage for smooth running performance against corrosion according to the standards.
In polypropylene pumps high alumina ceramic sleeve is used to protect shaft from any type of corrosion and abrasion. Mechanical seal prohibit the leakage from the pumps and best cast iron heavy duty oil lubricated bearing housing helps for achieving maximum strength of pumps.
Product Details:
| Minimum Order Quantity | 1 Number |
| Head | Up to 45 mtr |
| Size | 25 mm to 75 mm |
| Temperature | Up to 100 degree C |
| Capacity | Up to 50 m3/hr |
| Pressure | Up to 5 kg/cm2 |
| Speed | Up to 2900 rpm |
| Material Of Construction | PP,GRP,PVDF,UHMWPE etc |
Product Details:
| Minimum Order Quantity | 1 Number |
| Head | Up to 45 mtr |
| Size | 25 mm to 75 mm |
| Temperature | Up to 100 degree C |
| Speed | Up to 2900 rpm |
| Capacity | Up to 50 m3/hr |
| Pressure | Up to 5 kg/cm2 |
| Material Of Construction | PP,GRP,PVDF,UHMWPE etc |
Product Details:
| Minimum Order Quantity | 1 Number |
| Head | Up to 45 mtr |
| Body Material | Cast Iron |
| Phase | Single Phase |
| Automation Grade | Manual |
| Fuel Type | Electricity |
| Capacity | Up to 50 m3/hr |
| Speed | Up to 2900 rpm |
| Temperature | Up to 100 degree C |
| Size | 25 mm to 75 mm |
| Pressure | Up to 5 kg/cm2 |
| Material Of Construction | PP, GRP, PVDF, UHMWPE etc |
We are leading manufacturer of polypropylene pumps known as SPP series.
The extremely strong and durable Corrosion Resistant Polypropylene centrifugal pumps can handle highly corrosive liquids, like acid, harsh chemical substances, and solvents. Endowed with a rugged design, the machine can be used for intermittent intervals, as well as continuous flow of fluid applications.
Product Details:
| Minimum Order Quantity | 1 Number |
| Body Material | Cast Iron |
| Fuel Type | Electricity |
| Head | Up to 45 mtr |
| Capacity | Up to 50 m3/hr |
| Pressure | Up to 5 kg/cm2 |
| Speed | Up to 2900 rpm |
| Temperature | Up to 100 degree C |
| Material Of Construction | PP,GRP,PVDF,UHMWPE etc |
4.4/5
Reviewed by 49 Users
Most Relevant Reviews